Single -boiled tap.

Today, in loading and unloading and lifting work and cranes and crane equipment are widely used. They are indispensable in construction and industry. With the help of them you can produce the most difficult types of work. Equipped with powerful equipment, lifting cranes perform various types of work.

The single -boiler tap is a variety of lifting equipment, which is installed on the breakfast beams, are usually attached to the wheeled beams. Equipment management is carried out on the basis of remote control using a special control panel, there are also varieties with the radio and control from the cabin. This lifting equipment consists of a cart for lifting the cargo, which can be equipped with a hand tale or an electrician. The electric power sphere differs in that it can lift the load and move the load vertically and horizontally. Its capabilities are not limited to this. This device can move a very heavy load within a short time.

In addition, there is another type of beam crane, which is called a two -linker crane. They move the load using two parallel load -bearing beams and this principle, they differ from single -storey.

Sing -point cranes have the following principle of operation: horizontal movement of cargo along the bearing beam using lifting units. The load evenly rises with the help of a lifting element, after which the running mechanisms move it in the horizontal direction. In addition, there are additional lifting elements that are used if it is necessary to lift the load of large volumes.

If necessary, you can move the crane equipment itself on pre -installed rails. With such capabilities, this equipment is preferably in operation in the room, in the open air and under a canopy. The main advantages of the crane -bar include the characteristics of the high loading capacity and durability of the equipment, the absence of height restrictions, as well as long spans allow you to move the load to a relatively long distance.

This type of hoisting cranes today is quite widely used in construction work, directly in industrial facilities and for other purposes.