Preparation of the base of the floor with a cement-sand screed

“Folding” is the upper part of the floor design, on which a special flooring can be laid. As we all know, the base for the floor can be made in two different methods in technology. So, if we consider the “dry” method, then special sheets are used, dry backfill, lags, slabs. The most traditional way to perform the installation of parquet and other material involves the use of a special cement -sand screed – this is a mixture that is a “wet” method aligned well.Why is the screed needed?

There are only a few conditions for the very expensive parquet laid on the base of the floor, it will be pleased with its high quality, and looked, so to speak, right: right:

– for the installation of the final floor, the entire surface should be perfectly flat.

– dynamically and statistically the construction of the floor should be strong.

– the load is divided into all underlying layers. The most uniform way.

– through such designs, if necessary, a special gender slope can be created. In addition, in height, the screed should be characterized by the same density, there should be no chips and cracks, and the slope of the surface should not be more than 0.2 percent.

Before performing the installation of parquet or tiles, use a special cement-sand mortar for aligning the floor or a special mixture is used for a bulk floor. The parquet needs a special layer aligned, prepared from a mixture of a special. Laying on the wall of tiles or laying on the floor does not require an additional such layer, because more than enough cement-sand screeds.

It is recommended to carry out all the work until the painting work is carried out before installing the doors.

The main demand today is for the mixture, which are intended for aligned floor for brick and stone, concrete foundations. The coatings that are made of such material can withstand a very large load, unusually easily tolerate all the blows with a possible drop in heavy objects, at the pressure of furniture and other very heavy structures. Most often, they are applicable in production and residential premises, in offices and in warehouses.